Basic Jumbo 24 Hull Components Kit

$3350.00 AB Fir Marine Plywood Kit
$3950.00 BS1088 Okoume Plywood Kit
 FOB Anchorage

Kit includes:
8 bottom panels, cnc'd to size and scarfed
8 side panels, scarfed ends but NOT cut to shape
2 stringer templates for stringer shape (both sides). LVL* NOT included.
1 bow stem, cut to shape
8 shelf pcs, cnc'd with angles cut and cnc alignment joints
5 transom pcs, all cnc'd with angles (6&12 degrees) cut.
Transom 2x8 LVL motor mount
2 shelf/transom braces, cnc'd with angles cut
4 chine pcs, cnc'd to shape
6 shelf alignment molds (full width), #6 mold has interlocking cnc'd
stringer and bow stem alignment support.
1 transom alignment wedge, cnc'd
3 bottom alignment molds
1 copy of "Tolman Alaskan Skiffs" to be used as a construction guide.

Basic 4'x19' building jig NOT included. 

Above Kit with LVL* Stringers (stringers $500.00) cut to size and shaped
$3850.00 AB Fir Marine Plywood
$4450.00 BS1088 Okoume Plywood

Please note, finished stringers are nearly 19' long, and wt. is 150lbs, check shipping charges before ordering.

All above parts plus Shelf Caps 1/2" (shelf caps $325.00) cnc'd for recessed bow
$4175.00 AB Fir Marine Plywood
$4775.00 BS1088 Okoume Plywood

Hull sides, bottom, transom & sheer shelf plywood pcs are AB Fir Marine Plywood.

The precise cutting of our parts save many hours of lofting, hand cutting and shaping these parts,
not to mention wasted material from any errors.
All transom parts are cnc'd with angles spec'd, you just glue it up and it is ready to install.
Since our mold pcs. are cnc cut this assures a precision aligned hull.
We also include email and phone support.

Lead time is 10-14 days. (May vary depending on work load)
A Crating Charge of $175.00 applies to orders shipped Truck,  Crate size: 53" x 103" x 24", weight 1100lbs.

 50 percent deposit at time of order, balance due when shipped.
We accept Visa and MasterCard
 

Skiffkits LLC shipments are F.O.B. Anchorage, delivery to carrier at point of origin shall constitute
delivery to Buyer and thereafter the shipment shall be at Buyer's risk.  Before signing the delivery receipt,
be sure to inspect for possible transit damage.  If damage has occurred, have the driver make a notation
on the delivery receipt and file a claim directly to the carrier's office.
Skiffkits/Lasertech Alaska assumes no responsibility for damage done while in transit.
Any increase in freight rates whether pre-paid or not and demurrage to be the Buyer's responsibility.